Jeep Suspension

Jeep Wrangler front bumper rear bumper suspension lift kit rock sliders zone offroad jka aev poison spyder spider 4x4 4wd advanced pretoria crawl crawling flex flexing roof racks jerry can 32 33 35 37 17 18 20 2007 2008 2009 2010 2011 2012 2013 2014 2015
Jeep Wrangler Lift Kits JK

TeraFlex JK 4 Door 2.5" Lift Kit w/ 9550 Shocks - Right Hand Drive

Description:

 

The TeraFlex JK 2.5” Suspension Lift Kit is an ultra simple performance oriented lift kit that provides amazing highway drivability with very capable off road performance. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back! This kit includes 2.5" lift coil springs, 9550 VSS shock absorbers, rear swaybar links, heavy duty rear trackbar axle bracket, bumpstop extensions and all necessary hardware. This kit will allow you to run up to a 35” tire (aftermarket wheels with 4.5” backspacing or less are required). Fits all right hand drive JK Wrangler models including Rubicon & Unlimited. Note: 2012+ JKs may require exhaust spacers (#2610000) or other exhaust modification for proper driveshaft clearance if front extended shock length is greater than 24.5”.

 

*Price subject to change due to the Dollar fluctuation 

R 16,300.00

  • 20 kg
  • Available
  • Ships within 1-2 days1

JK 4 Door 3" Lift Kit w/ 8 FlexArms - Right Hand Drive

  

 

Description:

 

The TeraFlex JK 3” Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back! This system includes 3” lift coil springs, all lower and upper adjustable FlexArms, front swaybar disconnects, rear swaybar links, rear trackbar bracket, bumpstops and all necessary hardware. This kit will allow you to run up to a 35” tire (aftermarket wheels with 4.5” backspacing or less are required). Fits all right hand drive JK Wrangler models including Rubicon & Unlimited. Note: Driveshaft modifications are recommended with this suspension system. 2012+ JKs require exhaust spacers (#2610000) or other exhaust modification for proper driveshaft clearance.

 

*Price subject to change due to the Dollar fluctuation 

R 44,648.00 2

R 40,400.00

  • 25 kg
  • Available
  • Ships within 1-2 days1

Teraflex JK 3"-4" 9550 VSS Front & Rear Shock Absorber Kit

Description:

 

The TeraFlex 9550 VSS is an exceptional shock absorber designed and developed specifically for a lifted Jeep Wrangler. This means you get the best extreme off-road performance and unequaled highway ride because it is engineered, valved, and tuned specifically for your Jeep. TeraFlex 9550 VSS shocks feature a proprietary in-house velocity valving that is tuned to react perfectly with TeraFlex suspension systems. A triple-chromed rod ensures trouble-free operation, and an oil block and seal wipe the shock rod during compression to keep all internal fluids sealed and contained for extended lifetime performance, additionally, an internal travel stop limiter minimizes the impact of over-compression. The 9550 VSS gas shock uses a heavy duty twin-tube design construction to provide protection from trail damage, and the durable black e-dipped finish resists salt and other corrosives under the most extreme conditions. Double-welded shock eyelets reinforce and support the shock body against repeated stress from constant suspension cycling. Premium-quality rubber bushings help to refine ride quality, Jeep specific mounting ends are vulcanized to the bushing to provide a hassle free installation. All TeraFlex 9550 VSS shocks are coverd by a limited lifetime warranty.

 

*Price subject to change due to the Dollar fluctuation 

R 5,255.00

  • 8 kg
  • Available
  • Ships within 1-2 days1

JK 4-DOOR 1.5-2” LIFT FALCON SERIES 2.1 SPORT MONOTUBE SHOCK ABSORBER KIT - ALL 4

DESCRIPTION

Designed specifically to meet the unique requirements of the Jeep Wrangler, Falcon Series 2.1 Sport Monotube Shocks provides more aggressive off-road handling with increased compression damping; ideal for the serious enthusiast wanting a consistently firm feel though all driving conditions.

An available standard Series 2.1 Monotube Shock (# 03-01-21-400-002) is engineered to deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in the same compact package at an affordable price.

The 6061-T6 precipitation-hardened aluminum alloy shock body protects the internal components from damage while providing superior heat dissipation for consistent performance. The monotube design incorporates the oil/gas separator to prevent cavitation.

Falcon Shocks feature Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures to reduce shock fade. The proprietary synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.

LIFT HEIGHT: 1.5-2”

 

INCLUDES:

• Four (4) Falcon Series 2.1 Sport Monotube Shocks

 

FEATURES & BENEFITS:

• JK specific shock

• Increases vehicle stability

• Improved dynamic roll control

• Improved low speed damping

• Optimized fitment for clearance during full suspension travel

• Front offset stud design creates additional frame clearance during articulation

• 2.25” shock body provides optimal performance

• Largest shock body that will fit w/out modifications

• 6061-T6 precipitation-hardened aluminum alloy shock body resists wear

• Smooth honed internal shock body surface for long term performance

• 3/4” shaft to prevent shaft buckling

• Induction hardened chrome plated shaft resists rock damage & corrosion

• OGS – the oil/gas separator prevents cavitation

• Digressive linear piston

• 1-piece Teflon bronze piston wear band w/ O-ring

• Hard anodized billet piston

• Aluminum construction for superior heat dissipation

• Red Line full synthetic shock oil

• 1,000-hour salt spray corrosion resistance test on all hardware

• Serviceable & rebuildable (factory serviced)

• Built in-house at the TeraFlex Falcon Shock Division

• 3-year warranty

• Patent pending design

 

*Price subject to change due to the Dollar fluctuation 

 

R 13,750.00 2

R 12,120.00

  • Available
  • Ships within 1-2 days1

JK 4-DOOR 2.5-3.5” LIFT FALCON SERIES 3.1 PIGGYBACK SHOCK ABSORBER KIT - ALL 4

DESCRIPTION

Designed specifically to meet the unique requirements of the Jeep Wrangler, Falcon Series 3.1 Piggyback Shocks are engineered to deliver race-inspired performance, handling, and stability on and off road.

Historically, universal shocks have been adapted to fit many applications with minimal tuning. Falcon Shocks change that mentality. Built from the ground up with a focus on fitment and function, corner specific Falcon Series 3 piggyback shocks deliver the best damping characteristics possible. After a lengthy and painstaking development process, we have finally delivered these advanced shocks to the awaiting Jeep market.

Front shocks feature a unique piggyback design with the reservoir positioned horizontally to increase clearance with large tires during articulation and turning. An offset upper stud positions the shock body away from the frame for maximum clearance.

The rear shock positions the body and reservoir at the bottom to eliminate shaft damage from rocks kicked up by the tires. The outboard mounting increases clearance for lifted vehicles with raised track bar brackets.

Falcon Shocks feature Red Line full synthetic shock oil with a high viscosity index of 519 for consistent performance across all temperatures to reduce shock fade. The proprietary synthetic formula also contains special anti-wear and lubricity agents that produce excellent thermal stability.

 

LIFT HEIGHT: 2.5-3.5”

 

INCLUDES:

• Four (4) Falcon Series 3.1 Piggyback Shocks

 

FEATURES & BENEFITS:

• JK specific shock

• Increases vehicle stability

• Improved dynamic roll control & low speed damping

• Optimized fitment for clearance during full suspension travel

• Front offset stud design creates additional frame clearance during articulation

• 2.25” shock body provides optimal performance

• Largest shock body that will fit w/out modifications

• 6061-T6 precipitation-hardened aluminum alloy shock body resists wear

• Smooth honed internal shock body surface for long term performance

• 3/4” shaft to prevent shaft buckling

• Maximum shaft diameter for optimal adjustable range when Upgrade Kits installed

• Induction hardened chrome plated shaft resists rock damage & corrosion

• OGS – the oil/gas separator prevents cavitation

• Digressive linear piston

• 1-piece Teflon bronze piston wear band w/ O-ring

• Upgrade to 3.2 Adjustable or 3.3 Fast Adjust via Adjustable Cartridge Upgrade Kits for quick compression adjustments (sold separately) – contact customer service for details

• Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose designs as well as eliminates common leakage issues found in banjo & swivel fittings

• Hard anodized billet piston

• Aluminum construction for superior heat dissipation

• Red Line full synthetic shock oil

• 1,000-hour salt spray corrosion resistance test on all hardware

• Serviceable & rebuildable (factory serviced)

• Built in-house at the TeraFlex Falcon Shock Division

• 3-year warranty

• Patent pending design

R 24,800.00 2

R 22,220.00

  • 9 kg
  • Available
  • Ships within 1-2 days1

FOX JK Steering Stabilizer

 

Description:

 

The TeraFlex tuned Fox Racing Shox steering stabilizer features an aircraft-grade 6061-T6 heat treated aluminum shock body with impact cold forged body construction. The internal floating piston provides controlled turning with a responsive feel. Heat treated and hard chrome plated 5/8” alloy steel shaft provide long lasting performance.

 

*Price subject to change due to the Dollar fluctuation 

R 4,345.00

  • 5 kg
  • Available
  • Ships within 1-2 days1

FOX ATS Through Shaft Steering Stabilizer

 

Description:

 

The FOX Performance Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX’s relocating hardware that moves the steering stabilizer up and out of the way. The ATS represents a revolutionary breakthrough in stabilizer design.

 

*Price subject to change due to the Dollar fluctuation 

 

R 11,110.00

  • 6 kg
  • Available
  • Ships within 1-2 days1

Teraflex Falcon Nexus EF 2.1 Steering Stabilizer for 07-18 Jeep Wrangler JK

The Falcon Nexus EF (Equal Force) Steering Stabilizers are engineered specifically for your Wrangler JK. The Equal Force design provides properly weighted steering feel which gives balanced consistent bi-directional turning for controlled side-to-side steering response and equal return to center dynamics. The JK Falcon Nexus EF 2.1 Steering Stabilizer features a fixed rate, non adjustable. Mounts to stock tie rod (1-3/8") or heavy duty versions (1-5/8").

 

*Price subject to change due to the Dollar fluctuation 

 

R 5,200.00

  • 6 kg
  • Available
  • Ships within 1-2 days1

Rock Rage Econo 2" Spacer Lift Kit

 

Now available the 2.0"/50mm Economy Kit for the 2 & 4 Door JK Wrangler. The Economy system features polyurethane spacers and includes bump stops, sway bar links and brake line drop brackets for the front. The 2.0"/50mm system is the perfect solution to clear 33" tires on a budget or for those looking to add more weight to the front of the vehicle with a bumper/winch combo! 

 

*Price subject to change due to the Dollar fluctuation 

 

R 7,500.00 2

R 4,950.00

  • 6 kg
  • Limited Stock
  • Ships within 1-2 days1

JK HD Dana 44/30 Upper & Lower Ball Joint Set of 4 w/o Knurl

 

Description:

 

TeraFlex HD ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. The upper ball joint incorporates hard sintered wear bushings to handle extreme side load demands without failure.

The lower ball joint features a threaded top cap for adjustable preload and allows grease servicing without axle shaft removal, even with larger RCV shafts. A machined grease passage in the lower joint housing assembly provides lubrication access without affecting the ball joint load surface.

These ball joints fit 2007-2012* JK Wrangler Dana 30 and Dana 44 axles.

Upper ball joint features

• Extremely hard Sintered wear bushings to handle side load demands without failure

• Magnesium Phosphate coating to inhibit corrosion throughout

• 4140 chrome moly Ball/stud and a 1045 carbon steel housing

• Factory style serrated flange nut and grease fitting

Lower ball joint features

• Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection

• 4140 chrome moly ball/stud with magnesium phosphate anti-corrosion coating

• Factory style serrated flanged castle nut

• Adjustable end cap with lateral greasing access for easy on the Jeep servicing

• CR black Neoprene boot locked into position with both a spring as well as a spring steel ring

Note: Fits 2007-2012* JK Wrangler Dana 30 & Dana 44 axles. We recommend ball joints without knurls as they will not score the inner knuckle and open up the bore. We also offer ball joint with knurls for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.

*SOME 2012 and ALL newer Jeep Wranglers come factory with larger front axle shafts (Dana 30 & 44) than previous years, and will require grinding on the stub shaft forging parting line for clearance.

 

*Price subject to change due to the Dollar fluctuation 

 

R 5,355.00

  • Available
  • Ships within 1-2 days1

Rear Track Bar Bracket for 3" - 6" lift

This Track bar bracket is for a Jeep JK with a lift of 3" - 6"

This trackbar bracket restores the factory handling and correct roll center for a lifted JK.

Rear Track Bar Bracket 3" - 6"

R 1,111.00

  • 3 kg
  • Available
  • Ships within 1-2 days1

Toyota Suspension


Ironman 4x4 Lift Kit for Hilux Revo 2016 - Current

Ironman Suspension is built tough for Australian conditions. Our suspension/lift kit will lift your Hilux approximately 45mm and includes 4 Nitro Gas shocks, front comfort/medium coils, 0-200kg leaf springs, fresh ubolts & bush kit.

 

Optional upgrades include foam cell or foam cell PRO shocks, spring rates and greasable shackles.

 

*Price subject to change due to the Dollar fluctuation 

R 24,500.00 2

R 22,120.00

  • Available
  • Ships within 1-2 days1